Error 40

Error 40 may occur when you press and hold the bell button for a long time, or when you press it too many times in a row. It can also occur if water gets into the button.

Error 41

Error 41 may occur when you press and hold the turbo boost button for a long time, or when you press it too many times in a row. It can also occur if water gets into the button.

Please try the following steps before buying new button.

Step 1: Reset

Reset your bike: Press and hold the power button on the underside of the top tube for two seconds until you see the reset symbol on the Matrix Display. Press either handlebar button to power the bike on. If the bike is locked, use one of the 3 ways to unlock your bike.

Step 2: System restart

If a reset doesn’t help, you can also try a system restart in the app: 
- Make sure you’re connected to the bike and go to the VanMoof app > Garage > Help > System restart. During the system restart, a boat horn will sound and a boat will appear in the Matrix display. 
- After the restart, you can wake up your bike with a reset.

If the three steps above don't help, the button might be stuck. Please verify this with the following steps:

• Check if the button still makes the bell sound 
• Check if you can wake up the bike from sleep with the bell button 
• Check if you can unlock your bike using your back up code